BBWJM - RP 6403 RESIN, PART B
- MSDS: BBWJM
- Manufacturer: CIBA GEIGY CORP
- Product Name: RP 6403 RESIN, PART B
- National Stock Number: 8010-00F006728
Product Identification
Product ID:RP 6403 RESIN, PART B
MSDS Date:01/01/1987
FSC:8010
NIIN:00F006728
MSDS Number: BBWJM
Responsible Party
Emergency Phone: (914) 347-4700
Cage: 02864
Contractor
Telephone: 517-351-5900
Cage: 02864
Ingredients
HYDROGENATED TERPHENYLS
CAS: 61788-32-7
RTECS: WZ6535000
OSHA PEL 0.5 PPM
ACGIH TLV: 0.5 PPM; 9192
METHYLENE BIS(PHENYL ISOCYANATE)
RTECS: NQ6350000
ACGIH TLV: 0.2 MG/CUM
Hazards
Effects of Overexposure:EYE/SKIN IRRITATION, BREATHLESSNESS, CHEST
DISCOMFORT, REDUCE PULMONARY FUNCTION, ALLERGIC SKIN.
First Aid
First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MINUTES. SKIN: WASH
W/SOAP & WATER. REMOVE CONTAMINATED CLOTHING/LAUNDER BEFORE RE-USE.
INGESTION: IF CONSCIOUS, GIVE PLENTY OF WATER. INDUCE VOMITING.
INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN. CALL PHYS.
Fire Fighting
Flash Point:>345F (OC)
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:AVOID WATER CONTAMINATION IN CLOSED
CONTAINERS OR CONFINED AREAS. CARBON DIOXIDE EVOLVED.
Accidental Release
Spill Release Procedures:ABSORB W/ABSORBENT MATERIAL & PLACE IN OPEN
TOP CONTAINER. UNDER GOOD VENTILATION, DONTAMINATE ABSORBANT &
SPILL AREA W/MIXTURE OF 90% WATER, 8% AMMONIA & 2DETERGENT
(EXOTHERMIC REACTION). LEAVE VENTI LATED 24 HRS BEFORE DISPOSAL
Handling
Handling and Storage Precautions:WARNING: HARMFUL IF INHALED. CAUSES
SKIN/EYE IRRITATION. CAUSES ALLERGIC SKIN/RESPIRATORY REACON. AVOID
CONTACT W/EYES, SKIN, & CLOTHING.
Other Precautions:AVOID BREATHING VAPOR OR MIST. AVOID
PROLONGED/REPEATED CONTACT W/SKIN. KEEP CONTAINER CLOSED. WASH
AFTER HANDLING. NUISANCEUST MAY BE GENERATED WHEN SANDING OR SAWING
CURED MATERIAL.
Exposure Controls
Respiratory Protection:IF >TLV AN AIR SUPPLIED RESPIRATOR SHOULD BE
WORN.
Ventilation:MECH LOCAL EXHAUST IN ACCORDANCE W/ACGIH RECOMMENDATIONS
Protective Gloves:IMPERVIOUS
Eye Protection:WEAR CHEMICAL GOGGLES
Supplemental Safety and Health
MSDS DATE: 11/15/86.
Chemical Properties
Vapor Pres:0.1
Vapor Density:>1.0
Spec Gravity:1.21
Solubility in Water:REACTS
Appearance and Odor:CLEAR AMBER LIQUID
Stability
Stability Indicator/Materials to Avoid:YES
WATER/ALCOHOLS/STRONG OXIDIZING AGENTS/STRONG BASES.
Stability Condition to Avoid:AVOID PROLONGED HEATING >160F OR STORING
<75F.
Hazardous Decomposition Products:CO, CO2, BENZENE, TOLUENE, NOX,
HYDROGEN CYANIDE
Conditions to Avoid Polymerization:CONTAMINATION W/OTHER PRODUCTS THAT
REACT W/ISOCYANATES.
Disposal
Waste Disposal Methods:CONSULT QUALIFIED LOCAL OR CORPORATE PERSONNEL
FOR METHOD THAT WILL COMPLY WITH LOCAL, STATE AND FEDERAL HEALTH
AND ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.